Glass wool panels: The glass wool panels are laid in the T15 or T24 profile system. Adaptations or edge zones are cut to the desired size and then sealed with paint. White cotton gloves should be used when installing the ceiling panels to avoid soiling and finger marks.<\/p>\n
Plasterboard:<\/strong> The plasterboards are laid in the T15 or T24 profile system. Adaptations or edge zones are cut to the desired size and then sealed with paint, and white cotton gloves should be used when installing the ceiling panels to avoid soiling and finger marks.<\/p>\n Metal plate system LAY IN:<\/strong> The metal plates are cut and installed in the panels along the wall, and the punching in the wall moulding is tilted out to hold the plate in place. The rest of the panels are then installed. It is recommended to add 5-10% of the whole panels to stailise the main profiles. White cotton gloves should be used when installing the ceiling tiles to avoid soiling and finger marks. To finish against the wall, either unperforated metal sheets can be used in the A edge, or E edge in combination with shadow wall moulding.<\/p>\n Metal plate system CLIP IN:<\/strong> The metal plates are cut and installed in the panels along the wall, and the punching in the wall moulding is tilted out to hold the plate in place. The rest of the panels are then installed. It is recommended to add 5-10% of the whole panels to stailise the main profiles. White cotton gloves should be used when installing the ceiling tiles to avoid soiling and finger marks.<\/p>\n Installation of luminaires and similar<\/strong> Light fittings and similar must not be mounted directly in the ceiling panels. The load must be evenly distributed to the support system using pressure distribution plates or additional suspension.<\/p>\n If you have any other questions regarding installation, please contact us.<\/p>","protected":false},"excerpt":{"rendered":" Glassull-plater: Glassullplatene legges oppi profilsystemet T15 eller T24. Tilpasninger eller randsoner skj\u00e6res til \u00f8nsket st\u00f8rrelse og kantforsegles deretter med maling. Det b\u00f8r brukes hvite bomullshansker ved ilegging av himlingsplatene for \u00e5 unng\u00e5 tilsmussing og fingermerker. Gipsplater: Gipsplatene legges oppi profilsystemet T15 eller T24. Tilpasninger eller randsoner skj\u00e6res til \u00f8nsket st\u00f8rrelse og kantforsegles deretter med maling.Det…<\/p>","protected":false},"author":1,"featured_media":9291,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[30],"tags":[],"class_list":["post-285","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-montasjeveiledninger"],"acf":[],"yoast_head":"\n