Our services for business and public

The most important thing you can do is contact us to hear how we can help you with your acoustic problems and arrange a sound measurement, a calculation, product guidance or just have a non-binding conversation. 

If you are a contractor/builder and have a major request. Please contact us directly. 

Further down the page, there is also a form you can fill out and submit, and we will contact you shortly.

Contact us

Would you like us to visit? The next step is for us to come and do an acoustic sound measurement, measure the area and take pictures. You tell us how you experience the problem.

We measure and calculate in accordance with the requirements set out in the NS 8175 and NS8178 (Sound in Buildings) standards, which are part of TEK10 and TEK17. We always recommend a sound class based on the use of the room and experience to get the best result.

If you want more attenuation than the requirements in the standard, it's up to you. The experience of sound is very individual.

You will receive the results of the acoustic measurements and a calculation of how much (number of square meters) sound insulation is needed in the area in question. Together we agree on the solution, choice of absorber type and location. You will receive a cost estimate and other useful information.

We send you the necessary materials. We take care of the installation or you can install it yourself by following our installation instructions. We are happy to invite you to our showroom for a review and demonstration of various solutions and products.

The prerequisite for achieving an optimal sound control result is that a calculation is first made of the acoustics in the room/area in question and that it is then calculated what needs to be done to bring the area into compliance with current regulations.

If you are not near us or want a simpler calculation. Read more under the next section Acoustics remote assessment & evaluation.

Are you far away from us, or want a simpler solution? Not all assessments need to be done on-site. We also have digitalized inspections and conduct remote assessments where we find the solution for you online.

Two options:

1. We can easily help you with an experience-based calculation. You send us some factual information and we calculate your approximate absorption needs, recommend product and location and price. This is free of charge. Fill in the form further down the page.

2. You send us measurements of the area in question, preferably a floor plan or simple sketch and photos. We perform calculations in accordance with the requirements set out in standards NS 8175 and NS8178 (Sound in Buildings), which are part of TEK10 and TEK17. For remote assessments, we also use experience-based calculations. We always recommend the sound class based on the use of the room and experience to get the best result.

   You will receive calculations including how much (number of square meters) sound insulation is needed in the area in question. We agree on the solution, choice of absorber type and location. You will receive a quote and other useful information. If you want a review, we can do it by phone or digital meeting.

   But if you want more attenuation, we will of course calculate it (we calculate what we experience as a minimum). The experience of sound is very individual and it is you who decides.

The prerequisite for achieving an optimal result of the sound control is that a calculation is first made of the acoustics in the room/area in question and that it is then calculated what needs to be done to bring the area into compliance with current regulations

After the Acoustics sound measurement & inspection has been completed, you will receive the results of the acoustic measurements and a calculation of requirements (number of m2). Together we agree on the solution and choice of absorbers. We prepare a cost estimate for installation if desired and a quote for materials. Acoustic calculations and other useful information are also included. Based on all this, we prepare a complete solution for you to the best of our ability.

In Norway, "Sound in buildings" is regulated by a separate regulation. We always base our calculations and recommendations on the current standards NS8175 and NS8178 (music and rehearsal rooms), both of which are included in TEK10/17.

Acoustics in all types of buildings are regulated in these regulations. 

Once you have received all the information from us following the previous step, we review this and agree on a solution for you based on your needs and wishes. We prepare the solution and choice of products based on this, the information we have received and the nature of the room. Unless otherwise agreed, we always recommend the best and most affordable solution. When reviewing the solution, you can make the changes you want, you can choose other products and we can put together a different type of solution if desired. The most important thing is the right amount of absorption and the right sound class for the products. The solution we offer includes everything you need to complete the installation.

We provide door-to-door delivery, or you can pick up at our central warehouse in Askim. Contact and address can be found here. 

Recommended soundproofing products will comply with current CE regulations and be M1 certified. Read more about this here. 

• We take care of the installation. Installation is carried out by experienced and professional installers. We check whether we have an agreement with an installer in your area. You will receive a price estimate and other information.
• You do the installation yourself. Many people choose to do the installation themselves, it doesn't have to be that complicated. Remember to follow the installation instructions. We have created installation instructions for all our products. You can find these here.
• You provide your own fitter. We don't have installers in your area or you want to arrange for an installer yourself. Then make sure that the installer receives the right installation instructions here. 

You get help from A to Z regardless of the solution.

After completion of the installation, we can carry out a new acoustic sound measurement and control in accordance with NS8175 and NS EN ISO 16283-1 2014 (method). Current NS8175 and NS EN ISO 16283-1 2014 (method). This is done to document the result in relation to the goals set and in relation to current regulations. Performed where we have carried out Acoustics sound measurement and on-site inspection and where our recommendations have been followed. Not carried out by remote assessment or simple calculation. Not performed if another solution and supplier of materials is used.