Loke™ Oval soundproofing float 40mm
kr 2 ,049.00 - kr 2 ,400.00 per m² incl. VAT
Raft. Very good sound absorption - sound absorption, class A. The panel is 1100x2100mm and 40 mm thick. Can be suspended from the ceiling or glued directly to the wall/ceiling.
Oval sound absorbing plate with textured surface.
The panel is designed specifically for installation suspended from the ceiling or glued to a wall or ceiling. The panel has a finely textured surface on all sides. It has extremely good sound absorption and is highly sound-absorbing. It is therefore very suitable for reducing reverberation and noise in all types of areas, such as offices and teaching environments, kindergartens and rooms with a lot of noise.
Installation. The panels are installed in the ceiling with wire suspension. Suspension consists of spiral screw, wire and fixing hook. Can also be glued to a wall or ceiling. The panels do not fit into a traditional T-system
Edge types. Edge A
Standard sizes and colors in stock. Special sizes and colors can be ordered.
Color. White, closest color code NCS 0502-Y and Dark Grey, color code NCS S 7005-G80Y / RAL 7039 Quarzgrau. The absorber can be printed with another color or design/image. Special production of own color code can be ordered (minimum 100 m2). Spotlights / lighting can be retrofitted.
Fire class. A2-s1,d0, according to EN 13501-1
The product is M1 certified. This means that the product has been tested and meets the strictest international requirements for emissions and non-use of toxic components. There are specific requirements for acoustic products that must be met to obtain M1 certification.
EPD (Environmental Product Declaration). The product has completed the LCA (Life Cycle Assessment) report and received the EPD (Environmental Product Declaration) certificate.
Cleaning and maintenance
The panel has a surface that allows easy dusting. If the panel is painted over, it will lose its soundproofing properties.
Data sheets and documentation
The plate is classified as class A
The absorption test is carried out in accordance with ISO 354:2003 without air behind the panels.
NRC = 0.90. The absorption coefficient (αw) is calculated to 0.90 according to ISO 11654.
The panels are installed in the ceiling with a suspension consisting of a spiral screw, wire and fixing hook, suspension purchased separately. The panels do not fit into a traditional T-system.
The boards can also be glued directly to ceilings and walls;
Installation guide glued up