Loke™ 40mm Sound deadening float

kr 1 ,190.00kr 1 ,548.00 pr. m² inc.vat

Raft with extremely good sound absorption. Sound absorption, class A. The plate is 40 mm thick. Installed with wire in ceiling.

Price per box.


Actual Area (sq m)
Total Price


Developed specifically for installation suspended from the ceiling (with wire) or glued to a wall or ceiling. The panel has a finely structured surface and also has a coating/coating on the surface that makes it easier to maintain and gives it a long service life compared to more traditional absorbers on the market. It has extremely good sound absorption and is highly sound-absorbing. It is therefore very suitable for reducing reverberation and noise in all types of areas, such as open landscapes with high ceilings, offices and teaching environments, kindergartens and rooms with a lot of noise.

Installation. The panels are installed in ceilings with wire suspension. The suspension consists of a spiral screw, wire and fixing hook. The panels do not fit into a traditional T-system

Edge types. Edge B

Sizes. Standard sizes and colours in stock. All our absorbers can also be used as rafts as they have painted and neat edges. Special sizes and colours can be ordered.

Colour. White, closest colour code NCS 0502-Y. Special production of your own colour code can be ordered (minimum 100 m2).

Fire class. A2-s1,d0, according to EN 13501-1

The product is M1 certified. This means that the product has been tested and fulfils the strictest international requirements for emissions and non-use of toxic components. There are special requirements for acoustic products that must be met to obtain M1 certification.

EPD (Environmental Product Declaration). The product has completed the LCA (Life Cycle Assessment) report and received an EPD (Environmental Product Declaration) certificate.

Cleaning and maintenance
The board has a surface that allows dusting and careful washing with a slightly damp cloth. If the disc is painted over, it will lose its properties.



Additional information

Size (mm)

1000 x 1200, 1200 x 2400

Data sheets and documentation





The disc is classified as Class A

The absorption test is carried out in accordance with ISO 354:2003 without air behind the boards. NRC = 0.90.
The absorption coefficient (αw) is calculated to be 0.90 according to ISO 11654.


The panels are installed in ceilings with suspension consisting of spiral screw, wire and fixing hook, suspension purchased separately. The discs do not fit into a traditional T-system.

Installation guide raft and baffle

The panels can also be glued directly to ceilings and walls;
Installation guide glued up

Information about sound damping when gluing sound-absorbing and sound-blocking panels