Installation of absorbents with screws with cover cups. Mounting instructions.

Attachment with decor cup.

See the range and price in online store here

Example

1. Measure and mark the 4 attachment points for the suspension screws, mark on the plate where the screw is to be screwed in.
2. Thread the screw through the brass nut and screw through the plate and into the wall/ceiling. Avoid screwing too tightly as the plate
   then can be destroyed.
3. Tighten the screws so that they are just tight enough and so that the decor cup can be attached to the brass nut without any problems.
4. Mount the decor cup on the brass nut.
5. The diameter of the screw head can be between 6 - 9 mm. Screws are not included.
6. Screws - recommendation for drywall and wood is 4.2 x 55 or 4.2 x 65 chipboard screws. Recommendation for concrete walls is 6 x 80 nail plugs. We recommend good, thin screws with coarse grooves that provide a good grip. As long as they are screwed into plaster without spinning, they will not slip. Sits as moulded on a wooden background. Take into account the thickness of the board on the wall it is to hang on. .

Two people are recommended to lift up the panel and fasten the screws. For sizes larger than 1200x1200mm, more fasteners should be used.