Yggdrasil™ perforated wood panel

Description

The solution is designed specifically for installation directly on walls or ceilings.

There are three components in the solution:

1: Eira^TM40mm black absorber (sound class A) with high density is mounted inside with

2. adhesive/fixing agent to the absorber.

3. the perforated MDF board is mounted on the outside of the absorber. Screws and mouldings are not included.

Sizes. Standard sizes and Oak surface. Absorbent and fabric are in matt black. Special sizes and selected RAL colours as special order.

Fire class. solution has B-s1-2, d0, according to EN 13823 and EN13501-1. The absorbent itself has fire class A2.

Installation.The panels are mounted directly on the ceiling or wall. Normally fixed with mounting adhesive and screws. The panels do not fit into a traditional T-system. Panels for T-system are special order.

The absorber is M1 certified. This means that the product has been tested and fulfils the strictest international requirements for emissions and non-use of toxic components. There are special requirements for acoustic products that must be met to obtain M1 certification.

Insulating properties. The absorbers have very good insulation properties. Laboratory tested in accordance with current regulations. Thermal thermal conductivity / Lambda value = 0.033W/(m-K). Thermal heat resistance = 1.191 (m2-K)/W.

EPD (Environmental Product Declaration). The product has completed the LCA (Life Cycle Assessment) report and received an EPD (Environmental Product Declaration) certificate.

Sustainability for the MDF panel. The wood used in the MDF board is produced in accordance with sustainability and certified by PEFC or FSC. Produced in Norway.

Cleaning and maintenance. The panel has a surface that allows dusting, vacuuming and careful washing with a slightly damp cloth. If the disc is painted/sealed again, it will lose its properties.